The CTL-SEN-R7/3410 is a high-precision dual-tech sensor designed for the Casambi ecosystem. Combining 24GHz mmWave radar with PIR sensing, it reliably detects static presence (such as micro-breathing) while eliminating false alarms. Powered directly by AC 100–240V and integrated with precision daylight sensing plus direct lighting control, it offers a seamless, all-in-one automation solution for smart spaces.
Features
Seamlessly configured and controlled via the Casambi App without requiring an external gateway.
Built-in local light control channel eliminates the need for an external relay, directly driving standard lighting fixtures for optimal device-load integration.
Accurately detects subtle human micro-movements (such as breathing) and reliably maintains presence detection for static occupants.
Cross-validates radar signals with passive infrared to effectively filter out environmental non-biological interference, significantly improving accuracy.
Intelligently adapts to complex architectural environments, enabling fast and hassle-free commissioning.
Supports direct AC 100–240V mains power for long-term, maintenance-free operation.
Supports parameter configuration and status readback via an infrared remote control.
Specifications
Wireless Protocol
Bluetooth 4.0/5.0 (Casambi)
Input Voltage
AC 100 to 240 V
Power Consumption
0.5 W (Max)
Relay Output
Normally Open Mode, Normally Closed Mode
Relay Load
AC 100 to 240 V, ≤ 2 A
Indicator Light
LED
Detection Mode
24GHz FMCW Radar + PIR
Operating Frequency
24.00 to 24.25 GHz
Transmit Power
≤ 10 dBm
Installation Method
Recessed Ceiling Mount
Mounting Height
2.0 to 3.2 m
Detection Angle
360°
Detection Coverage
Installation at 3.0 m Height: ① Motion & Micro-motion: Detection diameter at least 8.0m ② Stationary Presence: Detection diameter at least 6.0m
Detection Range
1.5 to 8.0 m (sensor to target)
Sensitivity
Highest, High, Medium, Low, Lowest
Illuminance Monitoring
0 to 32,000 Lux (Accuracy ±4%)
Delay Time
5 to 3,600 seconds
Product Size
Φ60 mm x 65 mm
Cutout Size
Φ50 mm
Product Weight
65 g
Operating Temperature
Indoor -20 to 45°C
Operating Humidity
< 95% RH (Non-condensing)
Storage Temperature
-40 to 85°C
Protection Level
IP20
Housing Material
PC
Range
Featuring advanced spatial coverage at a standard mounting height of 3.0 meters, this dual-tech presence sensor offers a micro-motion/stationary detection coverage diameter of approximately 6.0 meters and a major-motion detection coverage diameter of up to 8.0 meters.
Front View
Side View
Dimensions
The flush-mounted sensor has an outer diameter of 60 mm, a depth of 65 mm, and fits standard Φ50 mm ceiling cutouts.
Product Dimensions
Applications
HomeHotelLightingOfficeSecurity
Mounting
Interference Mitigation: Keep away from moving objects (curtains, fans, plants), reflective metal/glass surfaces, HVAC air vents, and EMI sources. Adjust detection range to prevent false triggers through thin partitions.
Device Spacing: Maintain at least 4 meters between sensors; avoid pointing radar faces directly at each other to prevent co-channel interference.
Mounting & Handling: Mount on a solid, vibration-free surface and avoid flimsy, vibrating panels. Handle with care without pressing on the Fresnel lens or internal antenna.
Electrical Safety: Powered by AC 100–240V. Turn off mains power before wiring; must be installed by a qualified electrician. Use flame-retardant wiring without exposed cores, and ensure upstream circuits include leakage and overload protection.
Packaging Disposal: Recycle packaging per local environmental regulations. Keep plastic bags away from children to avoid suffocation hazards.
Disclaimer: Specifications are subject to change without notice. The manufacturer is not liable for device damage or losses caused by improper wiring, mounting, or uncalibrated conditions.
Wiring Diagram
Debugging
IR Remote Control
Designed for ultimate convenience and efficiency, this product supports quick on-site configuration and parameter reading using an infrared (IR) remote control. Once deployed, debugging and maintenance can be easily accomplished even without relying on a smart home platform.
CASAMBI
CASAMBI is a professional-grade wireless lighting control system based on Bluetooth Mesh technology, featuring a decentralized architecture that enables large-scale, low-latency, and precise dimming without the need for complex wiring or central gateways.
FAQ
Note, does this R7 Casambi model (S1) have a relay?
Yes, it includes a relay (unlike the pure data Casambi nodes in the Mini series). The body internally integrates a 2A (approx. 300W) control relay natively. It is not only a sensor but can also directly cut off or conduct the high-voltage power of luminaires, achieving the deepest integration of device and load.
Is its Bluetooth network configuration complex? Need to buy an extra gateway?
Very simple. It has a built-in Bluetooth Low Energy module supporting the Casambi protocol, requiring no external gateway. After powering on, directly open the Casambi App on-site to discover and program it into the existing smart lighting network for seamless use.
How does the FMCW radar used in dual-technology help compared to traditional technologies?
FMCW (Frequency-Modulated Continuous-Wave) radar can detect weak human breathing, solving the problem of traditional PIR easily losing targets when personnel sit still reading or working. The cross-validation of PIR and radar signals effectively filters out non-biological environmental interference.
If there is intense direct sunlight on-site, will it cause severe false alarms?
False lighting can be largely avoided. The severe temperature difference from sunlight interferes with PIR, but the dual-tech logic requires the radar to also detect micro-motion before acting. Sunlight is hard to trigger radar micro-motion, enhancing the system's anti-environmental interference ability.
How is the built-in illuminance meter in the body used in the Casambi system?
The data measured by the built-in 0-32,000 Lux high-precision sensor can not only be used for the local relay's light intensity threshold judgment (no light during the day) but can also be broadcast in real-time to the Casambi network, linking advanced dimming drivers in the system to achieve smooth constant light control.
What are the size and ceiling depth requirements for the body probe?
The R7 body is compact, requiring a cutout diameter of 50mm. Because a transformer and relay are integrated internally, the height is 65mm. Considering the top wiring, it is recommended to leave an avoidance depth slightly greater than 80mm inside the ceiling.
Will an exhaust fan in the installation environment cause interference?
It easily causes false alarms. 24G microwaves are sensitive to mechanical vibrations. During installation, the sensing surface must avoid exhaust fan vents and be fixed on a stable, vibration-free ceiling; otherwise, regular rotation will be judged as human activity.
Can it be forced to operate via physical buttons?
The body surface provides a hidden "Pairing Button". This button is mainly used for Bluetooth network reset and debugging. For constant lighting control of fixtures, it is currently mainly intervened via the scene mode of the Casambi App.